Save to shopping list
Create a new shopping list

DJI Mavic 3 Pro drone - FAQ

2023-04-25
DJI Mavic 3 Pro drone - FAQ

How many versions does the DJI Mavic 3 series have?? What are the differences between them?

The DJI Mavic 3 series is available in three versions: Mavic 3 Pro, Mavic 3 Pro Cine and Mavic 3 Classic.


The Mavic 3 Pro is equipped with an imaging system consisting of three multi-focal cameras, including a Hasselblad 4/3 CMOS camera with a 24mm equivalent format, a new 1/1.3-inch CMOS 70mm medium telecamera, and an upgraded 166mm telecamera. Mavic 3 Pro provides better imaging performance and a maximum flight time of about 43 minutes.


In addition to these features, the Mavic 3 Pro Cine supports Apple ProRes 422, Apple ProRes 422 HQ and Apple ProRes 422 LT codecs and comes with a built-in 1TB SSD for high-speed data storage.

Does the DJI Mavic 3 series support the DJI Goggles series and DJI Motion Controller?

DJI Mavic 3 series is compatible with DJI Goggles 2, DJI Goggles Integra and DJI RC Motion 2.

What are the differences between the DJI Mavic 3 Pro kits?
DJI Mavic 3 Pro (DJI RC) includes DJI RC, DJI 65W portable charger and smart battery pack.

DJI Mavic 3 Pro Fly More Combo includes newly upgraded DJI 100 W USB-C power adapter, battery charging hub (100 W), three smart batteries, ND filter set (ND8/16/32/64) and drone bag.

Compared to the DJI Mavic 3 Pro Fly More Combo, the DJI Mavic 3 Pro Cine Premium Combo includes the DJI Mavic 3 Pro Cine drone with a built-in 1TB SSD and DJI 10 Gbps Lightspeed data cable for high-speed data transmission.

You can choose the combination according to your needs.
What is the most efficient way to export files from the built-in SSD of the DJI Mavic 3 Pro Cine?
Use the Lightspeed DJI 10 Gbps data cable included in the kit to connect your drone to your computer via USB-C port. Make sure the write speed of the storage device exceeds 700 MB/sec.

Using other data cables is not recommended because it may take longer to transfer files, as high-speed transmission may not be supported.

How do I switch between the medium telecam and the DJI Mavic 3 Pro series telecam?
Using the DJI Mavic 3 Pro Series, you can switch between cameras in several ways.

If you're using the camera in exploration mode, using photo or video, you can use the camera's control dial to digitally magnify from 1x to 3x, 3x to 7x, and 7x to 28x. During digital zoom scrolling, you switch to another lens only when the zoom value reaches the optical zoom of the next lens.

In all other shooting modes: Single, AEB, Series and Timed Shooting, the optical zoom of each lens can only be accessed by tapping 1, 3 and 7 on the screen in the camera view.

In video modes, you can use the camera's control dial to zoom in digitally or click the corresponding optical zoom numbers on the screen in camera view. Selecting magnification by touching the screen automatically switches to a lens of that focal length.

Do the DJI Mavic 3 Pro Series medium telecams and telecams support Pro mode?
The DJI Mavic 3 Pro series supports Pro mode in Normal Photo mode and Normal Video mode, but not in Exploration mode.

Can I take RAW photos with a medium tele lens or tele camera from the DJI Mavic 3 Pro series?
The medium telecamera and telephoto lens support shooting RAW images in normal shooting mode, but not in exploration mode.

Does the DJI Mavic 3 Pro series support SmartPhoto?
Yes. All three cameras in the DJI Mavic 3 Pro series support SmartPhoto. SmartPhoto takes multiple photos continuously to unify the image. When the drone is in motion or using a medium 48 MP telecamera, SmartPhoto will be unavailable. The effects of the photos taken may vary.

Which remotes are supported by the DJI Mavic 3 series?
DJI RC Pro, DJI RC and DJI RC-N1.

What is the video transmission range of DJI Mavic 3 Series?
When using DJI RC Pro, DJI RC or DJI RC-N1, the maximum video transmission range in Europe is 8 km.

How to set the video bit rate to 48/50/60 fps./s?
When video recording is set to 30 frames per second or more at any resolution, the frame rate of live broadcast will automatically switch to 48/50/60 frames per second depending on the decoding capability of the mobile device and the bandwidth of the broadcast.

Does the DJI Mavic 3 series support simultaneous control with two remotes?
Not.

Does the DJI RC-N1 remote control support O3+ video transmission when used with the DJI Mavic 3 Series drone?

Yes.
1. When paired with a DJI Mavic 3-series drone, the DJI RC-N1 remote control will automatically update the firmware if necessary. DJI RC-N1 supports O3+ video transmission, such as DJI RC Pro and DJI RC.
2. In an interference-free environment, these remote controllers can support a maximum transmission range of 8 km according to CE.
3. Remote controllers support 1080p/60fps live streaming.

When used with different drones, the controllers will automatically select the appropriate firmware version to update and support the following transmission technologies supported by the connected drone's hardware:
a. DJI Mini 3/DJI Mini 2/DJI Mavic Air 2: O2
b. DJI Mini 3 Pro/DJI Air 2S: O3
c. DJI Mavic 3 Series: O3+

What I should pay attention to when using DJI Mavic 3 Series propellers?
If any propeller is damaged or distorted, replace it immediately to ensure safe flight.

How to properly mount DJI Mavic 3 Series propellers?
Attach propellers with gray markings to motors with identical gray markings and attach the remaining two unmarked propellers to the corresponding unmarked motors. Go to the "Propellers" section of the Mavic 3 Pro manual for more information on attaching propellers to your drone.

How DJI Mavic 3 Series flight time is measured?
Flight time was measured in a controlled test environment. The specific test conditions were: flight at a constant speed of 32.4 km/h in a windless environment at sea level, with APAS turned off, AirSense turned off, camera parameters set to 1080p/24 fps./s, video mode off and from 100% battery level to 0% battery level.


Results may vary depending on environment, actual use and firmware version.

What improvements does the omnidirectional sensing system have in the DJI Mavic 3 series compared to previous generations?
DJI Mavic 3 series can accurately detect obstacles in all directions. Cameras with multiple sensors and wider detection range help Mavic 3 Series react faster to obstacles. In a well-lit environment, the Mavic 3 Series can avoid obstacles faster and smoother, safely capturing stable footage even when flying sideways or backwards.

What improvements the new ActiveTrack 5.0 has over previous generations?
ActiveTrack 5.0 can track objects in eight directions, providing more creative possibilities. It has the latest object recognition technology. Simultaneously uses multiple vision sensors to recognize an object, distinguish it from other objects, and locks the object in the frame. Allows users to smoothly adjust tracking angles for more natural results. With the new environment and object detection algorithms, the DJI Mavic 3 Series reacts earlier to the object and environmental information and plans a more optimal tracking route to record smooth and stable footage.

What improvements Smart RTH has over the previous version?
Compared with the maximum forward detection distance of 20 meters, the DJI Mavic 3 series has a maximum forward obstacle detection distance of 200 meters during RTH. During flight, the DJI Mavic 3 Series will use advanced environmental sensing technology to determine the safest and most energy-efficient flight route to return to home point.

What is the difference between normal bypass mode and Nifty mode for APAS 5.0?
In Nifty mode, obstacle detection sensitivity is reduced. Bypass maneuvers will be less abrupt and sharp, reducing the impact of obstacle avoidance movements on footage.

What improvements the Mavic 3 Series - QuickTransfer has over other DJI drones?
With the Wi-Fi 6 protocol, data transmission is even faster, with download speeds of up to 80 MB/sec. In addition, compared to the DJI Mini 2, the DJI Mavic 3 series automatically selects the fastest transmission mode based on its wireless environment without manually switching to Wi-Fi mode, making it easier to use the.

How long it takes to fully charge the DJI Mavic 3 smart battery?
Approximately 96 minutes while charging with the connected USB-C charging cable of the DJI 65 Watt Portable Charger.
Approximately 70 minutes while charging with DJI 100 W USB-C power adapter and charging cable.

Can I use other chargers with USB-C ports for charging?
Yes. However, to ensure charging efficiency, we recommend using DJI's 65W portable charger, DJI's 100W USB-C power adapter, or other chargers with 60W or more that support the PPS/PD protocol.

Can I charge the DJI Mavic 3 Series directly through the drone's built-in USB-C port?
Yes.

Is the DJI Mavic 3 Pro series compatible with DJI Mavic 3 or DJI Mavic 3 Classic accessories?
A detailed table showing drone compatibility is available in this article. The following accessories are currently compatible:
1. DJI RC
2. DJI RC Pro
3. DJI RC-N1
4. DJI Mavic 3 series smart battery pack
5. DJI Mavic 3 series low noise propellers
6. DJI Mavic 3 series battery charging hub
7. DJI 65W car charger
8. DJI 65 Watt Portable Charger
9. DJI Convertible Carrying Bag
10. Lightspeed DJI 10 Gbps data cable

The following accessories are not compatible:
1. DJI Mavic 3 storage cover
2. DJI Mavic 3 Classic storage cover
3. DJI Mavic 3 Series Propeller Shield
4. DJI Mavic 3 Series protective case
5. DJI Mavic 3 ND filter set and DJI Mavic 3 Classic ND filter set
6. DJI Mavic 3 wide angle lens and DJI Mavic 3 classic wide angle lens
Show more entries from April 2023
pixel