Mobile RTK station D-RTK 2
Drone service
Helpful
Reliability
Trust
Own warehouse 
Warranty
![]()
Mobile RTK station D-RTK 2
The D-RTK 2 Mobile Station is DJI's upgraded high-precision GNSS receiver that supports all major global navigation satellite systems, providing real-time differential corrections that generate centimeter-level positioning data to improve relative accuracy.
Positioning with an accuracy of 1 centimeter
The D-RTK 2 mobile station fully supports GPS, GLONASS, Beidou and GALILEO. Easy and quick to set up, the D-RTK 2 mobile station provides real-time differential data for drones, achieving centimeter positioning accuracy. The built-in high-gain antenna offers better signal reception from more satellites, even in the presence of obstacles.
Stay connected on every mission
D-RTK 2 Mobile Station supports communication via 4G, OcuSync, WiFi and LAN, ensuring uninterrupted, stable data transmission in any application scenario. Up to 5 remotes* can be connected to the D-RTK 2 Mobile Station simultaneously when used with DJI Agras, Phantom 4 RTK or P4 Multispectral drones. When used with the Matrice 300 RTK drone, it can be connected to multiple drones, enabling coordinated swarming operations, greatly improving efficiency.
* When used with the Matrice 210 RTK V2, the D-RTK 2 Mobile Station can only be connected to one drone.
Reliability you can trust
With an IP65 rating and a lightweight carbon fiber body, the D-RTK 2 mobile station is extremely easy to transport and ready for any task, no matter how difficult it is. The built-in IMUs monitor movements and calibrate the inclination sensors to alert the operator of any abnormalities during the mission, minimizing the risk of danger.
| GNSS RECEIVER | |
| GNSS Frequency: | Simultaneous Reception： GPS: L1 C/A, L2, L5 BEIDOU: B1, B2, B3 GLONASS: F1, F2 Galileo: E1, E5A, E5B |
| Positioning Accuracy: | single point: Horizontal：1.5m(RMS) Vertical：3.0m(RMS) RTK Horizontal：1cm+1ppm(RMS) Vertical：2cm+1ppm(RMS) 1 ppm means 1mm less accuracy for each km of distance from the device. |
| Positioning frequency: | 1Hz, 2Hz, 5Hz, 10Hz and 20Hz |
| Cold start: | < 45 sec. |
| Hot start: | < 10 sec. |
| Recovery time: | < 1 sec. |
| Initialization Accuracy: | > 99.9% |
| data format: | RTCM 2.X/3.X |
| AND HIM | |
| Characteristics: | Built-in, precise 6-axis accelerometer D-RTK 2 movement monitoring system Slope measurement Electronic spirit level |
| GENERAL CHARACTERISTICS | |
| Sizes (D-RTK 2 headband base): | 168×168×1708mm |
| Degree of protection: | IP65 |
| Compatibility | DJI Inspire 3 Phantom 4 RTK / Multispectral Mavic 3 Multispectral / Enterprise / Thermal Matrices 300 RTK |
| COMMUNICATION AND DATA STORAGE | |
| Transmission Type: | OcuSync, WiFi, LAN, 4G |
| Working frequency: | 2.400 GHz to 2.483 GHz (China, USA, Australia, Europe, Japan, South Korea) 5.725 GHz to 5.850 GHz (China, US) |
| EIRP: | OcuSync 2.4GHz SRRC (Mainland China) / CE (Europe) / MIC (Japan) / KCC (Korea): ＜20 dBm FCC (USA, Australia) / NCC (Taiwan, China): ＜26 dBm 5.8GHz FCC (USA, Australia) / SRRC (Mainland China) / NCC (Taiwan, China): ＜26 dBm WiFi 2.4GHz SRRC (Mainland China) / CE (Europe) / MIC (Japan) / KCC (Korea): ＜20 dBm FCC (USA, Australia) / NCC (Taiwan, China): ＜22 dBm 5.8GHz FCC (USA, Australia) / SRRC (Mainland China) / NCC (Taiwan, China): ＜22 dBm |
| Transmission range: | 1/3 operating mode Working mode 4 Working mode 5 |
| Built-in memory: | 16GB |
| ENERGY PARAMETERS | |
| Energy consumption: | 12W |
| Power: | 16.5 to 58.8V DC |
| Battery: | Type: Lithium Ion Capacity: 4920mAh Energy: 37.3WH |
| Working time: | WB37 battery: about 2 hours MG-12000P battery: approximately 50 hours |
| Working temperature: | -20° to 55°C |
Kit Contents:
- 1x D-RTK station 2
- 1x pole without tripod
- 1x WB37 battery charging hub
- 1x AC adapter
- 1x power cable
- 1x USB-C cable
- 1x USB-C OTG cable
- 1x Hex key
- 2x WB37 battery
Specification Mobile RTK station D-RTK 2
Get expert advice