Save to shopping list
Create a new shopping list
Drone DJI Matrice 3D + DJI Care 2 years
Drone DJI Matrice 3D + DJI Care 2 years
Drone DJI Matrice 3D + DJI Care 2 years
Drone DJI Matrice 3D + DJI Care 2 years
Drone DJI Matrice 3D + DJI Care 2 years
Drone DJI Matrice 3D + DJI Care 2 years

Drone DJI Matrice 3D + DJI Care 2 years

Producer:DJI
EAN:0000051302

Gross price:4 697,70 €

Cena netto:
3 819,26 €
Available
Available
30 days for free returns
This product is not available in a stationary store
Sprawdź ofertę wynajmu
Wynajmij od 353 netto / mc

• Oferta dla klienta biznesowego

• Płacisz tylko za korzystanie

• Umowa na 12 miesięcy

• Faktura VAT

Save by buying more
15 043,80 €14 798,20 € incl. VAT
Cheaper in the set by 1%
See the set
Drone DJI Matrice 3D + DJI Care 2 years
4 697,70 €

Drone DJI Matrice 3D + DJI Care 2 years



The new DJI Matrice 3D/3TD series is specially designed for the DJI Dock 2. Matrice 3D is equipped with a telephoto camera and a wide-angle camera with mechanical shutter, ideal for high-precision mapping at 1:500 scale.

Dron-DJI-Matrice-3D-Air-Fly

Protection classMaks. flight timeMaks. reachMaks. horizontal speedMaks. wind resistanceOperating temperature
IP5450 min10 km75.6 km/h43.2 km/h-20° to 45° C

The drone has a built-in RTK antenna with a positioning accuracy of ± 3 cm, which enables full obstacle detection from all sides and automatic obstacle avoidance, enhancing the safety of any flight with a 6-way obstacle detection system. It is extremely efficient, with a maximum flight time of up to 50 minutes and an operating range of 10 km. The IP54 rating makes it dustproof and waterproof, and its ability to charge for 400 cycles makes it extremely practical for use.

Wide angle camera

  • 4/3-inch CMOS
  • 24mm format equivalent
  • effective pixels 20 MP
  • mechanical shutter

Telecamera

  • 1/2-inch CMOS
  • 162 mm format equivalent
  • effective pixels 12 MP
Dron-DJI-Matrice-3D
Szybkie ładowanie

Fast charging

DJI Dock 2 charges the drone from 20% to 90% in just 32 minutes, providing efficient power for subsequent operations.

Site mapping

After the flight, DJI FlightHub 2 generates accurate 3D models based on the collected flight data, authentically recreating the operational environment. You can describe, measure and download the models.

Flight route editor

Using precise 3D models, you can visually edit the flight path from a first-person perspective and view the results of simulated imaging. This facilitates intuitive and efficient operation and improves flight path planning and accuracy.

AI spot check

Frame a specific area in a 3D model and the drone will automatically compare the area to be captured with the restricted area in subsequent automated operations. Actively adjusts camera angle to ensure accurate capture of the same area on multiple flights.

FlyTo tasks

FlyTo tasks in DJI FlightHub 2 use precise 3D models to automatically plan an optimal flight path. Before carrying out an urgent task, all you have to do is click on the object and the aircraft will fly to the destination via an efficient and safe route.

Live flight control

Based on DJI FlightHub 2 or a third-party cloud platform, even if DJI Dock 2 is installed at a distance, you can control the flight and angle of the gimbal with a keyboard and mouse.

Avoiding obstacles

When performing automatic flight tasks, the drone uses omnidirectional obstacle detection and automatic obstacle avoidance functions to increase the efficiency of flight tasks.

Specification:


Drone

Weight1410 g
(This figure includes the weight of the battery, propellers and microSD card, but excludes third-party parts. Actual product weight may vary due to differences in batch materials and external factors.)
Maximum takeoff weight1610 g
Dimensions335×398×153 mm (D×S×W, without propellers)
Propeller span

Diagonal span: 463.2 mm
Left-right span: 359.9 mm
Front-to-rear span: 291.4 mm

Maximum climbing speed6 m/s (Normal mode)
8 m/s (Sport Mode)
Maximum descent speed6 m/s (Normal mode)
6 m/s (Sport Mode)
Maximum horizontal speed
(at sea level, no wind)
Normal mode, with obstacle detection enabled: 15 m/s flying forward, 12 m/s flying backward, 10 m/s flying sideways
Sport mode: 21 m/s flying forward, 18 m/s flying backward, 16 m/s flying sideways
Maximum wind resistanceDuring operations: 12 m/s
During takeoff/landing: 8 m/s
Maximum takeoff height4000 m
Maximum flight time

50 minutes

Measured under controlled test conditions. The specific test conditions are as follows: forward flight at a constant speed of 46.8 km/h in a windless laboratory at an altitude of 20 meters above sea level, in photographic mode (no in-flight photography), with obstacle avoidance disabled, from 100% to 0% battery level. Results may vary depending on environment, actual use and software version.

Maximum lift time

40 minutes

Measured with DJI Matrice 3D series drones hovering in a windless space 20 meters above sea level from 100% to 0% battery level. Results may vary depending on environment, actual use and software version.

Maximum radius of operation

10 km

Measured in an environment with a temperature of approximately 25°C (77°F) at a safe battery level of 25%, a wind speed of approximately 4 m/s, a two-way flight speed of approximately 15 m/s, and hovering operation for 10 minutes. Results may vary depending on environment, actual use and software version.

Maximum flight range

43 km

Measured with DJI Matrice 3D/3TD drones flying at a constant speed of 54 km/h in a windless environment at 20 meters above sea level from 100% to 0% battery level. Results may vary depending on environment, actual use and software version.

Maximum tilt angle25° (Normal mode)
25° (Sport mode)
Maximum angular velocity250°/s
Global Satellite Navigation SystemGPS + Galileo + BeiDou + GLONASS
(GLONASS is supported only with RTK module enabled.)
Lifting accuracy
(windless or light wind)

Vertical:
±0.1 m (with video positioning)
±0.5 m (with GNSS positioning)
±0.1 m (with RTK positioning)

Horizontal:
±0.3 m (with video positioning)
±0.5 m (with GNSS positioning)
±0.1 m (with RTK positioning)

Operating temperature-20° to 45° C (-4° to 113° F)
Protection classIP54
Engine model2607
Propeller model1149, folding, not quick release
RTK moduleIntegrated into the drone
BeaconIntegrated into the drone

Wide angle camera

Image sensor4/3 CMOS, Effective pixels: 20 MP
LensPOV: 84°
Format equivalent: 24 mm
Aperture: f/2.8-f/11
Sharpness: 1 m to ∞
Removing lens foggingWide angle camera supports lens fog removal.
ISO range100-6400
Exposure time

Electronic shutter: 8-1/8000 s
Mechanical shutter: 8-1/8000 s

Maximum image size5280×3956
Shooting modes

Single: 20 MP
Clock: 20 MP, 0.7/1/2/3/5/7/10/15/20/30/60 sec
Smart Low-light: 20 MP
Panorama: 20 MP (raw image); 100 MP (stitched image)

Video resolutionH.264
4K: 3840×2160@30 fps./s
FHD: 1920×1080@30 fps./s
Video bit rate4K: 130 Mbps
FHD: 70 Mbps
Supported file systemexFAT
Photo formatJPEG
Video formatMP4 (MPEG-4 AVC/H.264)

Camera with telephoto lens

Image sensor1/2-inch CMOS, Effective pixels: 12 MP
LensPOV: 15°
Format equivalent: 162 mm
Aperture: f/4.4
Sharpness: 3 m to ∞
Removing lens foggingWide angle camera supports lens fog removal.
ISO range100-6400
Exposure timeElectronic shutter: 8-1/8000 s
Maximum image size4000×3000
Photo format

JPEG

Video formatMP4 (MPEG-4 AVC/H.264)
Shooting modesSingle: 12 MP
Clock: 12 MP, 0.7/1/2/3/5/7/10/15/20/30/60 sec
Smart Low-light: 12 MP
Video resolutionH.264
4K: 3840×2160@30 fps./s
FHD: 1920×1080@30 fps./s
Video bit rate4K: 130 Mbps
FHD: 70 Mbps
Digital zoom8x (56x hybrid magnification)

Gimbal

Stabilization3-axis mechanical gimbal (tilt, roll, rotate)
Mechanical rangeTilt: -135° to +45°
Tilt: -45° to +45°
Rotation: -27° to +27°
Controllable rangeTilt: -90° to +35°
Turnover: Not controllable
Maximum control speed (tilt)100°/s
Angular vibration range±0.005°

Sensors

Detection typeDrone supports obstacle detection in six directions.
The drone has a blind area of 10° at the upper rear end. Always fly carefully.
ForwardMeasuring range: 0.5-21 m
Detection range: 0.5-200 m
Effective detection speed: Flight speed ≤ 15 m/s
FOV: Horizontal 90°, Vertical 90°
BackwardsMeasuring range: 0.5-23 m
Effective Detection Speed: Flight speed ≤ 12 m/s
FOV: Horizontal 90°, Vertical 90°
SideMeasuring range: 0.5-15 m
Effective detection speed: Flight speed ≤ 10 m/s
FOV: Horizontal 104°, Vertical 90°
UpMeasuring range: 0.5-21 m
Effective Detection Speed: Flight speed ≤ 6 m/s
FOV: Front and rear 90°, Left and right 90°
DownMeasuring range: 0.5-14 m
Effective Detection Speed: Flight speed ≤ 6 m/s
FOV: Front and rear 95°, Left and right 110°
Work environmentForward, backward, left, right and upward: Surfaces with recognizable patterns and adequate lighting (lux > 15)
Bottom Line: Diffuse reflectivity surface with diffuse reflectivity > 20% (e.g., walls, trees, people) and adequate illumination (lux > 15)

Video transmission

Video transmission systemDJI O3 Enterprise
Live view quality720p/30fps, 1080p/30fps (with DJI RC Pro Enterprise)
540p/30fps, 720p/30fps, 1080p/30fps (with DJI FlightHub 2)
Frequency of operation

2.4000-2.4835 GHz
5.150-5.250 GHz (CE: 5.170-5.250 GHz)
5.725-5.850 GHz

In some countries and regions, the 5.1 GHz and 5.8 GHz frequency bands are prohibited, or the 5.1 GHz frequency band is only allowed for indoor use. Please refer to local laws and regulations for more information.

Maximum transmission range (no obstructions, no interference)

FCC: 15 km
CE: 8 km
SRRC: 8 km
MIC: 8 km

Measured in an undisturbed outdoor environment, free from interference.
The above figures show the farthest communication range for one-way flights without return according to each standard. Always pay attention to RTH reminders in DJI FlightHub 2 during flight.

Maximum transmission range (unobstructed, with interference)

Strong interference (dense buildings, residential areas, etc.).): 1.5-3 km (FCC/CE/SRRC/MIC)
Medium disturbance (suburban areas, urban parks, etc.).): 3-9 km (FCC), 3-6 km (CE/SRRC/MIC)
Low interference (open spaces, remote areas, etc.).): 9-15 km (FCC), 6-8 km (CE/SRRC/MIC)

Measured while the aircraft is flying (no third-party loads) in undisturbed environments with typical interference. The above figures show the farthest communication range for one-way flights without return according to each standard. Always pay attention to RTH reminders in DJI FlightHub 2 during flight.

Maximum download speed

5 MB/s (with DJI Dock 2)
15 MB/s (with DJI RC Pro Enterprise)

Measured in a laboratory environment with low interference in countries/regions that support both 2.4 GHz and 5.8 GHz. Download speeds may vary depending on actual conditions.

Least delayVideo transmission delay from aircraft to docking is approximately 110-150 milliseconds (depending on current environmental conditions).
Video transmission delay from docking to DJI FlightHub 2 depends on actual network conditions and computer configuration.
Antenna4 antennas, 2T4R
Transmitter power (EIRP)2.4 GHz: < 33 dBm (FCC), < 20 dBm (CE/SRRC/MIC)
5.1 GHz: < 23 dBm (CE)
5.8 GHz: < 33 dBm (FCC/SRRC), < 14 dBm (CE)

Memory

Supported memory cardsU3/Class10/V30 or higher cards are supported. Below is the list of recommended microSD cards.
Recommended microSD cardsSanDisk Extreme 32GB V30 A1 microSDHC
SanDisk Extreme PRO 32GB V30 A1 microSDHC
SanDisk Extreme 512GB V30 A2 microSDXC
Lexar 1066x 64GB V30 A2 microSDXC
Kingston Canvas Go! Plus 64GB V30 A2 microSDXC
Kingston Canvas React Plus 64GB V90 A1 microSDXC
Kingston Canvas Go! Plus 128GB V30 A2 microSDXC
Kingston Canvas React Plus 128GB V90 A1 microSDXC
Kingston Canvas React Plus 256GB V90 A2 microSDXC
Samsung PRO Plus 256GB V30 A2 microSDXC

Accumulator

Capacity7811 mAh
Maximum charging voltage17.0 V
TypeLi-ion 4S
Chemical systemLiNiMnCoO2
Energy115.2 Wh
Weight544 g
Number of cycles400
Charging temperature5° to 45° C (41° to 113° F)

Power supply

Input100-240 V (AC), 50/60 Hz, 2.5 A
Output power100 W
Output

Maximum output power 100 watts (total)

When both ports are in use, the power supply dynamically allocates the output power of both ports according to the load power, and the maximum output power of one port is 82 watts.

Charging

InputUSB-C: 5-20 V, 5.0 A
OutputBattery port: 12-17 V, 8.0 A
Rated power

100 W

Charging type

Simultaneous charging of one battery

Charging temperature

5° to 40° C (41° to 104° F)

Specification Drone DJI Matrice 3D + DJI Care 2 years

Brand
DJI
Producer code
0000051302
Warranty
24 months
Model
DJI Matrice 3D
Potrzebujesz pomocy? Zadaj pytanieDo you need help?Get expert adviceWe answer promptly, and make the most interesting questions available to everyone.
Ask a question
If this description is not sufficient, please send us a question to this product. We will reply as soon as possible. Data is processed in accordance with the privacy policy. By submitting data, you accept privacy policy provisions.
Add an opinion
Your opinion:
5/5
Add your own product photo:

Megadron Blog

IdoSell Trusted Reviews
4.90 / 5.00 4369 reviews
IdoSell Trusted Reviews
2024-12-16
Easy to order, quick delivery. Only minor down side was that one or two e-mails where in Polish. Not strange for a Polish webshop ;) But as an international customer it would be great to receive everything in English.
2024-11-11
Wszystko gra! Zawsze
pixel