FAQ | DJI Lito X1 - answers to frequently asked questions
What are the main improvements of DJI Lito X1 over DJI Mini 3?
DJI Lito X1 introduces comprehensive improvements to the camera system, vision sensor system, flight performance and video transmission system.Among the most important changes are:
- Camera system: DJI The Lito X1 is equipped with a 1/1.3" CMOS sensor and a new image processing platform.Supports HDR video recording up to 4K/60fps, slow-motion filming up to 4K/100fps, and 2.7K vertical recording.For HDR video, it offers a 14-degree dynamic range.The drone uses portrait optimization technology DJI, and also supports intelligent recording modes such as MasterShots, QuickShots and Hyperlapse, making it much easier to create professional content.
- Sensor system: DJI Lito X1 has a front LiDAR sensor that supports omni-directional obstacle detection.The device actively detects and avoids objects (e.g. buildings) during flight and when returning to the starting point, which translates into greater safety when taking night shots in urban areas.The drone also memorizes flight paths in good lighting conditions, allowing for quick takeoff and safe return even in the absence of a satellite signal.
- ActiveTrack: DJI Lito X1 supports ActiveTrack mode, whose performance has been enhanced to provide a better balance between speed, agility and tracking safety.
- Flight Performance: the Intelligent Flight Battery provides up to 36 minutes of flight time and allows takeoff from altitudes up to 4,500 m n.p.m.The Intelligent Flight Battery Plus extends this time to 52 minutes with a maximum takeoff altitude of 3,500 m n.p.m.
- Video transmission: The DJI O4 system offers 10-bit video transmission over distances of up to 15 km, featuring greater signal stability, better noise immunity and higher image quality.
- Off-State QuickTransfer: DJI Lito X1 offers 42 GB of built-in memory.The drone supports remote wake-up via the DJI Fly app within Bluetooth range, enabling file transfers of up to 50 MB/sec.
- Battery charging performance: Using the DJI 65W Portable Charger and charging hub, it takes about 45 minutes to fully charge one Intelligent Flight Battery, and about 56 minutes to fully charge one Intelligent Flight Battery Plus battery.Charging three Intelligent Flight Batteries takes a total of about 87 minutes, while it takes about 130 minutes for three Intelligent Flight Batteries Plus.
What is the certification class of DJI Lito X1 in Europe?Are there restrictions on accessories due to the certification class?
Certification class DJI Lito X1 in Europe depends on the specific kit.
EASA certified kits C0 and UK0 include:
In the EU and UK, drones from these kits do not support Intelligent Flight Battery Plus or propeller guards.
DJI Lito X1 Fly More Combo Plus (DJI RC 2) has EASA certifications C1 and UK1.In the EU and the UK, the drone supports Intelligent Flight Battery Plus or propeller guards, but these items cannot be used at the same time.
How to activate DJI Lito X1?
For the control apparatus DJI RC-N3:
Connect your mobile device (with internet access) to the control apparatus, then establish a connection to DJI Lito X1 via the DJI Fly app.Follow the instructions in the app to activate DJI Lito X1.
From DJI RC 2:
When using DJI RC 2 for the first time, connect to the Internet via Wi-Fi or a hotspot from your smartphone, then follow the instructions on the DJI Fly app to activate the device.After activating DJI RC 2, connect the camera to DJI Lito X1 using the DJI Fly app and follow the instructions on the app to activate the drone.
Is DJI Lito X1 waterproof?
Not.Avoid contact with water during use, as it may damage the device.
If rainfall occurs during the flight, return to the takeoff point as soon as possible and land.Allow the drone to dry completely - both inside and out - before using it again.
What application should be installed before using DJI Lito X1?
DJI Lito X1 can only be used with the DJI Fly app.The latest version of DJI Fly can be downloaded from the DJI Lito X1 Downloads section of the official website DJI.
For the DJI RC 2 control apparatus, the DJI Fly application is already pre-installed.
Does DJI Lito X1 support obstacle detection?
Yes.With new omni-directional obstacle detection* DJI, Lito X1 detects and avoids objects while tracking from the front and side.As a result, even beginners can operate the drone with ease, stability and confidence.The device is also equipped with a front LiDAR sensor, which increases the effectiveness of detecting small obstacles in front of it.
*Omni-directional obstacle detection works only on clearly structured surfaces and in lighting conditions exceeding 5 lux.For details, please refer to the product sheet on the official website DJI or the user manual.
Which control instruments are compatible with DJI Lito X1?
Control instruments DJI RC-N3 and DJI RC 2.
How to set the antennas of the control apparatus?
For optimal transmission quality, point the antennas toward the drone.
What is the video transmission range of DJI Lito X1?
When using the control apparatus DJI RC 2 or DJI RC-N3, the transmission range can be up to 15 km*.
*The measurement was performed in an open outdoor environment, without interference and in accordance with the IC standard.The above figures represent the maximum transmission range for flights in one direction (no return).When flying, always pay attention to the RTH messages in the DJI Fly app.
How to update DJI Lito X1 software?
When the drone is connected to the control camera and a new software version is available, the DJI Fly app will display an update notification.Follow the instructions to update the software of the drone, control unit, battery and other devices.
You can also perform the update using DJI Assistant 2 (Consumer Drones Series) software on your computer.The latest version of the software is available at DJI Lito X1 Downloads on the official website DJI.
What factors can cause the upgrade to fail?
- The battery charge level of the drone or control apparatus is less than 20%.
- Drone or control apparatus gets disabled during upgrade.In this case, restart the drone and the control apparatus, then try again.
- Network connection is interrupted while downloading firmware.
- When downloading firmware, it switches to another application on the smartphone.
- If the temperature of the drone is too high, the system displays a message that the update cannot be performed.Turn off the device, wait for it to cool down, move it to a shaded place and try again.
The drone will start up multiple times during the update and shut down automatically when the update is complete.
