FAQ | DJI Power 1000 Mini - answers to frequently asked questions
What UPS mode DJI Power 1000 Mini offers and how to use it?
UPS (Uninterruptible Power Supply) is an uninterruptible power supply mode that allows power to be supplied to connected equipment in the event of a power outage, preventing possible disruption or damage to operations.
When electrical devices are connected to the switched-on station DJI Power 1000 Mini , and at the same time both the station and the devices are powered from the mains, press the AC button on the station and make sure that the AC output indicator lights up solidly.In this situation DJI Power 1000 Mini automatically enters UPS mode.The station can start powering connected devices within 0.01 seconds*.You can choose to use this mode depending on the type of devices you use.
*Data were obtained under controlled laboratory conditions.
How to update firmware DJI Power 1000 Mini?
You can update your firmware with the DJI Home app.After connecting DJI Power 1000 Mini to the app and setting up the Wi-Fi network, go to Settings > Software Update to update the device to the latest software version.
Recharge yourself with DJI Power 1000 Mini
What is the warranty period DJI Power 1000 Mini?
The default warranty period is three years.You can get an additional two years of warranty by downloading the DJI Home app and making your first connection to the device.Some accessories, including the pull-out module, are not covered by the 5-year warranty.
How to maintain DJI Power 1000 Mini to optimize its service life?
Do not store the power station for long periods of time after it is fully discharged.Otherwise, the battery may be over-discharged, which can lead to irreversible damage to the cells.
For long-term storage, first charge the device to 100% and then discharge it to about 60%.Storing for long periods of time with a high charge level can accelerate the wear and tear of the battery, while too low a charge level increases the risk of over-discharge of the battery.
Thereafter, perform a charge and discharge cycle approximately every four months.First, discharge the station to 15%, turn it off and wait at least two hours.Then charge the device to 100%, using Standard Recharge mode to keep the battery in good shape.
What to do if an error code appears on the power station?
If an error code appears on the power station display, you can connect to the DJI Home app to check the details of the problem and a possible solution, or visit DJI, for more information.
What charging methods does DJI Power 1000 Mini support?
Alternating current (AC):
- Charging from the mains through the AC input port.
Direct Current (DC):
- With the built-in high-power car charging module, you can use the DJI Power Car Battery Charging Cable to connect DJI Power 1000 Mini directly to your internal combustion car battery and charge your device with DC power.
- Built-in MPPT module allows connection of photovoltaic panels via DJI Power MC4 Solar Power Charging Cable and efficient solar charging.
- You can connect the station to your car's cigarette lighter socket using the DJI Car Power Charging Cable for DC charging.
- It is also possible to charge through the USB-C port or with a slide-out USB-C cable by connecting the station to a compatible charger.
How to adjust charging speed DJI Power 1000 Mini?
AC port charging input power and SDC port car charging input power can be adjusted in the DJI Home app.
How to turn on AC power?How many modes are available?
Once the station is turned on, you can press the AC button to start AC power, or turn it on remotely in the DJI Home app.
If you press the AC button once, the indicator will slowly flash.In this situation, AC power will be automatically turned off if no device draws power from the AC ports for half an hour.
If you press and hold the AC button, the indicator will be lit solid and the AC power will not be turned off automatically.
How to change the output frequency of AC current?
If the AC input frequency does not match the currently set output frequency, the station display will show an error code.In this situation, the AC output frequency must be changed manually:
Make sure the AC power is on, disconnect the AC charging cable and all connected devices, and then press and hold the AC button for about 10 seconds until the frequency on the display changes.
What to look out for when using the station in cold weather?
At low temperatures, power supply efficiency decreases and output power is reduced.
After what time DJI Power 1000 Mini shuts down if it does not supply power?
Auto shutdown time can be set in DJI Home app.If the station does not supply power, it will automatically turn off after 30 minutes (default setting).
What functions are supported by SDC ports?
The SDC port supports the following functions:
Charging:
- Quickly charge DJI Power 1000 Mini directly from a combustion car battery (up to 400 watts) using the DJI Power Car Battery Charging Cable connected to the SDC port.
- Charge DJI Power 1000 Mini from a 12-volt or 24-volt cigarette lighter socket with up to 120 watts or 240 watts, respectively, using the DJI Power Car Power Charging Cable connected to the SDC port.
- Fast charging DJI Power 1000 Mini from photovoltaic panels with up to 400 watts of power using DJI Power MC4 Solar Power Charging Cable connected to SDC port.
Power supply:
- Quickly charge smart drone batteries DJI Matrice 4 Series, DJI Mavic 3 Series, DJI Mavic 4 Pro, DJI Air 3 Series, Matrice 30 Series and DJI Inspire 3 using the appropriate fast charging cables.
- Power your car devices with DJI Power SDC to Car Charger Plug Power Cable.
- Charging RC model batteries in the field by connecting a balance charger using DJI Power SDC to XT60 Power Cable (12V).
DJI The Power 1000 Mini has a built-in MPPT and fast charging module, but does not support the DJI Power 1kW Super Fast Car Charger or DJI Power 1.8kW Solar/Car Super Fast Charger.It also does not allow capacity expansion using the DJI Power Expansion Battery 2000.
Does DJI Power 1000 Mini support DJI Power Dongle?
No, it does not support.DJI The Power 1000 Mini has a built-in wireless connectivity module and can connect directly to Wi-Fi and the DJI Home app.
What to look out for when using the fast charging feature of DJI Power SDC for drones DJI?
After the flight, wait for the drone's battery to cool down before connecting it to a suitable fast charging cable DJI Power SDC.Otherwise, the charging speed may be lower.
The last 5% of charging the drone's battery (from 95% to 100%) is done in the backup charging mode, so the charging speed is then lower.You can consider using the battery when it is charged to 95%, as the operating time will not be significantly shorter than when fully charged.
Is the retractable cable module on the DJI Power 1000 Mini interchangeable?
Yes.DJI Power 1000 Mini has a built-in module with a retractable cable.It can be replaced - just lift the cover at the notch with a suitable tool, release the side latches, then remove and replace the module.
How to adjust the brightness of the LED strip in DJI Power 1000 Mini?
DJI Power 1000 Mini has a built-in LED strip.One press turns the light on or off, a double press activates SOS mode, and holding down the button allows you to smoothly adjust the brightness.
