DJI Power 2000 frequently asked questions - FAQ
What is UPS mode in DJI Power 2000 and how to use it?
UPS mode (from. Uninterruptible Power Supply) is primarily used to supply power to equipment via DJI Power 2000 in the event of a power outage and prevent any problems that might be caused by such a failure.
When the devices are connected to the switched-on station and use mains power together, press the AC button and make sure that the AC output indicator lights up solid - then power station DJI Power 2000 will automatically switch to UPS mode.
DJI Power 2000 will start emergency powering connected devices in less than 10 ms.
You can decide whether to use this mode depending on the connected devices.
What is the warranty period DJI Power 2000?
The default warranty period is three years. It can be extended for another two years by downloading the DJI Home app and making the first call.
How to take care of the power station DJI Power 2000 and how to extend its life?
DO NOT store a fully discharged power station for an extended period of time - this can lead to over-discharge and permanent damage to the cells.
For long-term storage, charge the station to 100% and then discharge to about 60%. Long storage with a high charge level accelerates battery aging, while too low a level can lead to over-discharge.
Every 4 months or so, perform a maintenance cycle: first discharge the station to 15%, turn it off and wait at least two hours. Then charge it to 100% in standard charging mode.
What to do if an error code appears on the power station?
If an error code appears on the station's display, you can connect to the DJI Home app to check its meaning and solution, or visit the DJI Power series support page for more information.
What to consider when using power stations in cold weather?
At low temperatures, performance may drop and input and output power will be reduced.
Whether the AC output port can be used at the same time when the energy storage function when connected to the grid is activated?
Yes, AC output port can be used simultaneously. The station can also act as a UPS, providing uninterrupted power to other equipment.
What charging methods does DJI Power 2000 support?
AC power supply:
Charging from the mains via the AC input port.
DC power supply:
1. Charging from a car alternator with the DJI Power 1kW Super Fast Car Charger.
2. Charge with solar power and/or car alternator using DJI Power 1.8kW Solar/Car Super Fast Charger.
3. Solar charging via module with DJI Power (MPPT) adapter and compatible panels.
What to look for when using DC/AC hybrid charging on DJI Power 2000?
DJI The Power 2000 supports simultaneous direct current (DC) and alternating current (AC) charging, offering up to 2,200 watts of power for the power station alone.
When an additional battery is connected, the charging power can increase up to 3,000 watts.
Maximum power of 3,000 watts is achieved during simultaneous alternating current (AC) and direct current (DC) charging - using DJI Power 1.8 kW or 1 kW charger.
AC charging power may vary by country.
How to get maximum power output via USB-C port?
USB-C port supports a maximum output power of 140 watts.
The device must support the PD 3.1 stadndard and be connected via an EPR-compliant USB cable.
For example, for a 16" MacBook Pro, using a standard USB-C charging cable will limit the charging power to 100 watts - you'll get the full 140 watts using a standard magnetic cable.
How to activate the AC power output? How many modes are available?
To activate the AC output, press the AC button after power on. You can also do it remotely - in the app DJI Home.
If you press the AC button once, its indicator will slowly flash. AC output will automatically turn off after 30 minutes without active charging to save power.
If you press and hold the AC button, the indicator lights up solid - in this mode, the AC output does not turn off automatically.
After what time DJI Power 2000 shuts down in power failure?
Auto shutdown time can be set in DJI Home app. By default, the device automatically shuts down after 30 minutes of no continuous power consumption.
What functions are supported by SDC ports?
DJI The Power 2000 has two SDC ports, each of which supports the following functions:
Charging:
1. Power station charging with up to 1,000 watts of power in the car using DJI Power 1 kW charger.
2. Power station charging with up to 1,800 watts using photovoltaic panels or 1,200 watts from panels and 600 watts from vehicle using DJI Power 1.8 kW charger.
3. Power station charging with up to 400 watts of power from photovoltaic panels via module with DJI Power (MPPT) adapter.
4. Charging from the car's power socket using the DJI Power to SDC power cable (12 V/24 V).
Capacity Expansion:
Expand capacity with DJI Power Expansion Battery 2000 - up to 10 batteries can be connected, giving a maximum of 22,528 Wh.
Power supply:
1. Fast battery charging for drones in the DJI series Matrice 4, Mavic 3, Air 3, Matrice 30 and Inspire 3 using the appropriate cables.
2. Power your devices in the car using the DJI Power SDC cable to the car charger.
3. Charging RC model batteries outdoors by connecting to a balancer charger (RC model battery charger) using the DJI Power SDC to XT60 (12 V) power cable.
What precautions should be taken when using the fast charging feature of DJI Power SDC for drones DJI?
After the flight, wait for the drone's battery to cool down before connecting the corresponding cable DJI Power SDC - otherwise the charging speed may be reduced.
The last 5% of charging (from 95% to 100%) is done in sustained mode, so this stage is noticeably slower. However, you may want to consider using a battery as low as 95%, since the operating time is not significantly different after a full charge.
