Kit Walksnail Avatar HD Pro Kit (Dual Antennas Version) + FPV Gimbal CADDXFPV GM3

Walksnail Avatar HD Pro Kit (Dual Antennas Version) + FPV Gimbal CADDXFPV GM3

The Avatar HD system uses the H.265 codec to provide 1080p FPV image quality with low latency. Equipped with a 1/1.8-inch Sony Starvis II sensor, this camera delivers excellent both day and night images.

The camera supports Gyroflow, and provides smooth and stable video quality.

• The kit includes 20mm x 20mm and 25mm x 25mm mounting holes, providing greater compatibility with a wider range of FPV drone models.
• The PCB and housing design has been updated, VTX quality has been improved, the design is more durable.
• The antenna mounting location has been optimized to better protect the VTX.
• The location of the frequency bind button has been changed to make the whole operation more convenient.
• A spare pad has been added to provide two power connection modes.

New VTX with improved TVS protection and support for up to 6S. With a wide input voltage range from 6V to 25.2V, the VTX provides unmatched stability. Enjoy unparalleled performance and take your FPV adventures to a new level with state-of-the-art technology.

The Avatar VTX has 32GB of built-in memory to record 1080p or 720p HD video without interference.

It supports both high and standard frame rates at the same time. At high frame rate, the average delay is 22 ms.

Designed with two antennas for more stable and powerful signals. The quality of the antenna has been improved, and the performance of the entire frequency band is more stable.

Based on pilots' feedback and implementing the head tracking function in the goggles, our R&D team has designed gimbals specifically for FPV cameras. The series includes three models: single-axis, two-axis and three-axis, tailored to different user needs. The gimbal's design is primarily aimed at enhancing the pilot's comfort, providing a stable, smooth image and enabling easy capture of stunning bird's-eye shots. The head tracking feature gives the pilot a more immersive experience.

Features:

✅ Enhanced FPV experience
✅ Head tracking function
✅ Exceptional stability
✅ Quick installation
✅ Compatibility and flexibility

Included:

• 1x Avatar HD Pro VTX
• 1x Avatar HD Pro camera
• 2x IPEX antenna
• 1x USB extension cable for data transfer
• 1x 4-Pin silicone cable
• 8x M2*4mm screws
• 4x Screws M2*5mm
• 4x Screws M2*6mm
• 4x Screws M2*14mm
• 4x Gasket M2*5*0.5mm
• 1x GM3
• 1x Power cable

Specifications:

Camera

Model: Avatar HD Pro camera
Image sensor: 1/1.8-inch Sony Starvis II sensor
Resolution: 1080P/60fps; 720P/120fps, 720P/60fps; 1080P/120fps compatibility;
Ratio: 16:9; 4/3
Lens: 8Mp
Field of view: 160°
Aperture: F1.6
Shutter: Rolling Shutter
Min illumination: 0.00001 lux
Weight: 9.5g
Dimensions: 19*19*24mm
Coaxial cable: 140mm

VTX

Model: Avatar V2 Pro Module (Dual Antennas Version)
Communication frequency: 5.725-5.850 GHz
Transmitter Power (EIRP): FCC: <30dBm; CE:<14dBm; SRRC: <20dBm; Microphone: <25dBm
Interface 1/O: JST1.0*4 (power input) JST0.8*6 (USB)
Mounting holes: 25.5*25.5mm; 20*20mm
Dimensions: 33.5*33.5*10.5mm
Built-in capacity: 32G
Recording: 1080p/720p
Weight: 15.4g
Operating temperature: -20-40 ℃
Channels: 8
Wide power input: 6 V-25.2 V
Supported system: FC Betaflight; Inav; Fettec; ArduPilot; Kiss
OSD: Canvas mode
Average latency: 22 ms
Antenna: 2 (IPEX)

Antenna

Polarization: LHCP
Frequency range: 5600 MHz-6000 MHz
Performance: 1.9dBi
VSWR: ≤1.5
Input impedance: 50 Ω
Interface: IPEX-1
Size: R15 X 45mm (without cable)
Weight: 2g

Gimbal GM3

Model: GM3
Camera Compatibility: 19mm FPV camera
Image stabilization: ±0.005°
Maximum controlled speed: ±1500°/s
Maximum rotation range (controlled):

• Pitch: ±120°

• Roll: ±60°

• Yaw: ±160°

Dimensions: 50 × 46.5 × 53 mm
Weight: 46 g
Control mode: PWM / UART
Control by head tracking: Supported
Voltage: 7-26V
Power consumption at rest: 1,5 W