Kit Walksnail Avatar FPV VRX + Avatar 1S Kit

Walksnail Avatar FPV VRX + Avatar 1S Kit

Take your FPV setup to the next level with the Walksnail Avatar FPV VRX + Avatar 1S Kit — a compact digital HD system built for pilots who want sharp video, low latency, and a lightweight onboard setup for smaller drones. This bundle combines the portable Walksnail Avatar VRX receiver with the ultra-light Avatar Mini 1S VTX kit, making it a great choice for freestyle, micro builds, and everyday FPV fun.

The Walksnail VRX receiver weighs only 83 g and measures 114 × 55 × 22 mm, so it is easy to carry and simple to add to your FPV goggles setup. If you want HD digital video without unnecessary bulk, this is a seriously practical solution.

• HD digital video transmission up to 1080p at 60fps
• Ultra-low latency averaging as low as 22 ms
• 4-antenna VRX design for stable signal performance
• Lightweight 1S VTX at only 6.8 g
• Built-in recording memory on the VTX
• Canvas Mode OSD support for Betaflight, INAV, KISS, Fettec, and ArduPilot
• HDMI output for clean, uncompressed video and audio output

4 Antennas for Better Reception

The VRX comes equipped with 4 antennas, including 2 directional antennas designed to improve signal coverage and help achieve transmission distances of up to 4 km. This setup gives pilots more confidence when flying farther out or in more demanding RF environments.

Crisp HD Video with Low Latency

The Walksnail system uses advanced H.265 encoding to deliver impressive image quality with minimal delay. Enjoy up to 1080p / 60fps resolution and latency as low as 22 ms, giving you a smooth, immersive FPV experience with the responsiveness you need for fast flying.

HDMI Output for Flexible Use

The built-in HDMI output lets you use uncompressed audio and video signals from the Walksnail HD system. It is a great feature for connecting compatible goggles, displays, or other viewing solutions without compromising image quality.

Canvas Mode OSD Support

Canvas Mode supports full OSD display for Betaflight, INAV, and KISS, allowing you to customize and view key flight data directly in your goggles. Adjust the parameters you want and keep the most important information right where you need it during flight.

Key Features

• 1080p / 60fps HD video transmission
• 720p / 120fps high frame rate mode
• 22 ms average latency in high frame rate mode
• 3.1V–13V power input
• Up to 500 mW output power
• Built-in 32 GB memory
• Ultra-light 6.8 g VTX

1080P/60FPS and 720P/120FPS

The Avatar HD system uses industry-leading H.265 encoding to deliver 1080p FPV video with ultra-low latency. It is a strong choice for pilots who want both detail and responsiveness in the air.

Lightweight Design – Only 6.8 g

The Avatar Mini 1S VTX weighs just 6.8 g, making it an excellent match for lightweight drones such as 75X-class builds. It helps keep your quad agile without sacrificing digital HD performance.

Low Latency for Real FPV Flying

The system supports both high and standard frame rate modes. In high frame rate mode, it can achieve an average latency of just 22 ms, helping you stay locked in during quick maneuvers and technical lines.

Built-in Memory for HD Recording

The Avatar Mini 1S VTX features 32 GB of internal storage, allowing you to record in 1080p at 60fps or 720p at 100fps/60fps in HD quality. It is a handy solution for saving your flights without needing extra onboard recording gear.

What’s in the Box?

• 1x Avatar FPV VRX
• 2x Red Bird Antenna
• 1x HDMI Cable
• 1x 2-in-1 DC Power Cable
• 1x Avatar Mini 1S Kit
• 1x 4-pin USB Cable
• 1x 6-pin Power Cable
• 2x M2x3/4 mm Screws
• 4x M2x16 mm Screws
• 4x M2 Nuts
• 5x 2.1x3.4x1 mm Washers

Specifications

Avatar VRX
Operating Frequency: 5.725–5.850 GHz
Transmitter Power (EIRP):
FCC: <30 dBm
CE: <14 dBm
SRRC: <20 dBm
MIC: <25 dBm
Ports: HDMI, microSD card slot, DC 5.5 × 2.1 mm
HDMI Output: 1080p60fps, 720p100fps, 720p60fps
Power Input: 7–21V (2S–5S)
SD Card Support: up to 256 GB (sold separately)
System: Avatar HD

Camera
Model: Avatar Nano
Image Sensor: 1/2.7"
Resolution: 1080p/60fps, 720p/120fps, 720p/60fps
Aspect Ratio: 16:9 / 4:3
Lens: 2.1 mm
Field of View: 170°
Aperture: F2.0
Shutter Type: Rolling Shutter
Minimum Illumination: 0.001 Lux
Weight: 3.5 g
Dimensions: 14 × 14 × 17 mm
Coaxial Cable: 55 mm (default) / 90 mm

VTX
Model: Avatar Mini 1S Module
Frequency: 5.725–5.850 GHz
Transmitter Power: FCC: <25.5 dBm; CE: <14 dBm; SRRC: <20 dBm; MIC: <25 dBm
Interface: JST1.0*6 / JST0.8*4
Mounting Holes: 25.5 × 25.5 mm
Dimensions: 30 × 30 × 6.5 mm
Memory: 8 GB (v2) / 32 GB (v3)
Recording: 1080p / 720p
Weight: 6.8 g
Operating Temperature: -20°C to 40°C
Channels: 8
Power Input: 3.1V–5V / 3.1V–13V
FC System Support: Betaflight, INAV, Fettec, KISS, ArduPilot
OSD: Canvas Mode
Bitrate: 25 Mbps / 50 Mbps
Latency: Average 22 ms
Antenna: IPEX

VTX Antenna
Model: Avatar V2
Polarization: LHCP
Band: 5600–6000 MHz
Gain: 1.9 dBi
VSWR: <1.5
Cable Length: 90 mm
Impedance: 50Ω
Connector: IPEX-1
Dimensions: D15 mm × L105 mm
Weight: 2 g