Kimpok ALPHA 10 analog transmitter

Kimpok ALPHA 10 Analog Transmitter is the most powerful model in the ALPHA series, built for hobbyists who need a seriously strong analog FPV video signal. With up to 10W output power, 80 channels, 12–28V input, and a handy 5V output for additional components, it’s a great fit for advanced FPV builds, long-range platforms, RC models, and analog video monitoring stations.

Designed for high-performance use, the ALPHA 10 combines Smart Audio support, an integrated cooling fan, a heatsink, an SMA antenna connector, and an 8-pin JST cable with dual power input and dual ground. The result is a powerful and practical VTX for users who want strong performance, clean integration, and dependable operation under heavy load.

Up to 10W Output Power for High-End FPV Applications

The biggest advantage of the Kimpok ALPHA 10 is its exceptionally high transmission power. The unit supports 1W, 3W, 5W, 7W, and 10W power levels, making it easy to match output strength to your build and flying conditions. Lower settings work well for standard use, while the full 10W mode is intended for setups where maximum analog video performance is the priority.

• 1W – entry-level power for less demanding applications.
• 3W – stronger signal for more stable FPV transmission.
• 5W – high output for advanced analog video systems.
• 7W – very strong transmission for demanding builds.
• 10W – maximum ALPHA 10 power for the most demanding FPV use cases.

Because this is a high-power VTX, proper installation matters. Always connect an antenna to the SMA port before powering on the unit, and make sure the transmitter has good airflow for safe and stable operation.

80 Channels for Flexible Frequency Matching

The Kimpok ALPHA 10 analog transmitter supports 80 channels, giving you more flexibility when matching frequencies to your receiver and operating environment. This wide channel range is especially useful for testing multiple FPV systems, flying in groups, and working in areas where interference may be present.

• 80CH support – broad channel selection for analog video transmission.
• Easier frequency matching – more freedom when configuring your transmitter and receiver.
• FPV-ready design – suitable for drones, RC models, and video platforms.
• Better multi-setup compatibility – more channels help reduce frequency overlap.
• Cleaner video feed potential – choosing the right channel can help minimize interference.

Smart Audio and Clearly Marked Connections for Easy Integration

The ALPHA 10 supports Smart Audio, allowing you to control selected transmitter settings from a compatible flight controller. That’s especially useful in FPV builds where the VTX can be hard to access once installed. It makes setup changes faster and more convenient without taking your model apart.

The housing features clearly labeled connection points, including 5V-OUT, GND, VIDEO, TBS, Dual Power GND, and Dual 12–28V IN. The module also includes a MIC marking, while the 8-pin JST cable helps keep power and signal wiring neat and organized.

• Smart Audio – convenient VTX control through a compatible FPV system.
• VIDEO input – for analog video signal input.
• 5V-OUT – 5V output for additional components in your setup.
• Dual 12–28V IN – dual power input for a more secure connection.
• Dual Power GND – dual ground connection for power.
• 8-pin JST connector – practical wiring solution for model installation.

Active Cooling for Reliable High-Power Performance

A VTX capable of up to 10W generates significant heat, which is why the Kimpok ALPHA 10 comes equipped with an integrated fan and heatsink. This cooling setup helps dissipate heat more effectively and supports more stable operation during intensive use.

• Built-in fan – active cooling for the VTX module.
• Heatsink – improved heat dissipation.
• High-power ready – built to handle demanding 7W and 10W modes.
• 30.5 x 30.5 mm mounting pattern – compatible with many popular FPV builds.
• Compact form factor – dimensions of 68 x 36 x 15 mm for easier installation.

When using the highest power levels, install the transmitter in a location with strong airflow. Never power the unit without an antenna attached, as this may damage the module.

Technical Specifications and Package Contents

The Kimpok ALPHA 10 analog VTX operates on 12–28V input voltage, with a 6S battery recommended by the manufacturer. For the ALPHA 10 version, current draw is 2.8A at 12V or 1.1A at 28V. The module weighs 48g, uses an SMA antenna connector, and features a 30.5 x 30.5 mm mounting hole pattern.

What’s in the box:

• Kimpok ALPHA 10 Analog Transmitter
• ALPHA user manual
• 8-pin JST cable for power and signal connections

Best uses:

• Analog FPV video transmission in drones and RC models.
• Advanced FPV platforms that require very high VTX output power.
• Long-range setups with a strong analog video signal.
• Testing systems and analog video monitoring stations.
• Installations that benefit from Smart Audio control.

Important usage tips:

• Connect the antenna to the SMA port before powering on the transmitter.
• Do not turn on the transmitter without an antenna installed.
• Check voltage, polarity, and wiring carefully before applying power.
• When running at 10W, make sure cooling and airflow are very good.
• Use only frequencies and power levels permitted by local regulations.